How to power a station and diagnose idle machines
Put Hydrogen Fuel in the station's Reactor, then give a machine a job it can actually run. A fueled reactor can look idle when nothing is drawing power. One refinery batch is enough to tell you whether that machine has power.
Start the reactor even if the station is dark
Refine Water Ice at the ship's workstation and carry the finished Hydrogen Fuel aboard the station. In the Early Access opening, two Water Ice make one fuel. Build a Reactor on the station and insert fuel directly. Keep a few units aboard the ship so that if the station runs dry, you can restart it without waiting for its powerless refinery to make fuel. Shipboard fuel recipe · First reactor startup.
Once conveyors are available, unload Water Ice into a Refinery set to Hydrogen Fuel and belt the finished fuel into the reactor. Put the dock's unloading filter on Water Ice. If the ship runs out of ice, this arrangement will run only as long as the remaining fuel lasts. Later, researched solar panels can also supply a station. Check the power overview for the station you're fitting out before deciding how much generation to add. Fuel line in operation · Sizing solar for a second station.
Use one refinery as a power test
Start with room for a finished item in the refinery output. Choose the Hydrogen Fuel recipe and put two Water Ice directly in the refinery input. Leave the reactor fueled and watch one cycle.
- Ice turns into fuel. This refinery has power. If an assembler beside it is idle, check that assembler's selected recipe, ingredients, and output space. If hand-fed ice works but belted ice never arrives, trace the incoming conveyor back to its source.
- The refinery runs, but the Science Lab stays idle. Select a technology and feed the lab the material that technology requires. For the opening Logistics I project, put Hull Plates into the lab and watch for Material Science progress. The developer explained in a demo-era reply that a reactor responds to demand and that the lab needs an active technology. Developer's troubleshooting reply · Early Access lab example.
- Several stocked machines stopped together. Check the affected station's reactor inventory and power overview while those machines have work waiting. Empty fuel calls for a manual restart. If demand has grown beyond supply after adding more machines or a mining bay, add generation and check the same machines again. In the launch playthrough, the station was already using 34 of its available 48 before the next expansion. See the power readout.
If power failed after an attack
Check the station console's Damage Report as well as the fuel supply. A player reported restoring generation by repairing a station with depleted hull health. An Early Access patch also fixed zero station health being reset on load, which can explain conflicting advice in older posts. After any needed repair, run the same refinery test before changing your station layout. Player's repair test · Station health fix.