Your first working factory in Main Sequence
Bring back titanium and nickel for construction, and Water Ice for fuel. Your first factory has a simple job. It should take ice from a docked ship and keep its own reactor fed while you work on something else.

Bring home ore you can actually use
Leave the tutorial on for your first Early Access world. From the pilot seat, use the scanner to find titanium, then nickel, then Water Ice. Break material loose from each asteroid and draw the fragments in with the tractor beam. Check the ship's cargo before flying on. If fragments are floating beside the hull but the stack isn't growing, check for free cargo space. See the opening mining run or follow the asteroid mining guide.
Get out of the pilot seat and use the ship's workstation. Refine ore into Titanium Plates and Nickel Plates, then use the assembler side to make Hull Plates and Lightweight Frames. Refine some ice into Hydrogen Fuel for startup. Leave a separate stack of raw ice in ship storage so there's something to unload when you test the factory. Watch the workstation recipes.
Get the station through its first research project
- Pick a site within easy reach of your ice and ore. Use the build menu to start a station, approach its dock, and follow the docking prompt. Carry construction parts off the ship with you. See station placement and docking.
- Build a Reactor on the station and put Hydrogen Fuel into it by hand. If the build calls for Magnetic Coils, you can make them back at the ship. Set aside room for a Refinery between the dock output and the reactor. Watch the reactor startup.
- Build a Science Lab, queue Logistics I in the research tree, and put Hull Plates into the lab. The lab turns them into Material Science. Once the research finishes, you can build conveyors. Make Basic Motors at the ship for the first belts. See the Logistics I unlock.
Follow one batch of ice all the way to the reactor
Set the station Refinery to Hydrogen Fuel. Configure the dock's unloading output for Water Ice, run a belt from that output to the refinery input, then run a second belt from the refinery output into the reactor. Keep the ship docked with raw ice aboard. Watch the dock filter and belt connections.
Watch two batches go through without touching the inventories. The ship's ice stack should fall, the refinery should process ice, and finished fuel should arrive at the reactor. If nickel comes out first, check the dock filter. If ice reaches the refinery but fuel stays there, trace the outgoing belt to the reactor. If the line runs and then stops when the ship empties, another load of ice is all it needs.
Once the line passes that test, use the space beside it for plate production. The base layout guide shows where to leave room for storage and a lab. If even a hand-fed refinery stays idle, work through the station power checks first.